8 Mbit Firmware Hub
A Microchip Technology Company
SST49LF008A
Data Sheet
The SST49LF008A flash memory devices are designed to be read-compatible
with the Intel? 82802 Firmware Hub (FWH) device for PC-BIOS application.
These devices provide protection for the storage and update of code and data in
addition to adding system design flexibility through five general purpose inputs.
Two interface modes are supported by the SST49LF008A: Firmware Hub (FWH)
Interface mode for in-system programming and Parallel Programming (PP) mode
for fast factory programming of PC-BIOS applications.
Features
? Firmware Hub for Intel 8xx Chipsets
? 8 Mbit SuperFlash memory array for code/data
storage
– 1024K x8
? Flexible Erase Capability
– Uniform 4 KByte Sectors
– Uniform 64 KByte overlay blocks
– 64 KByte Top Boot Block protection
– Chip-Erase for PP Mode Only
? Single 3.0-3.6V Read and Write Operations
? Superior Reliability
– Endurance:100,000 Cycles (typical)
– Greater than 100 years Data Retention
? Low Power Consumption
– Active Read Current: 6 mA (typical)
– Standby Current: 10 μA (typical)
? Fast Sector-Erase/Byte-Program Operation
– Sector-Erase Time: 18 ms (typical)
– Block-Erase Time: 18 ms (typical)
– Chip-Erase Time: 70 ms (typical)
– Byte-Program Time: 14 μs (typical)
– Chip Rewrite Time: 15 seconds (typical)
– Single-pulse Program or Erase
– Internal timing generation
? Two Operational Modes
– Firmware Hub Interface (FWH) Mode for
In-System operation
– Parallel Programming (PP) Mode for fast
production programming
? Firmware Hub Hardware Interface Mode
– 5-signal communication interface supporting byte Read
and Write
– 33 MHz clock frequency operation
– WP# and TBL# pins provide hardware write
protect for entire chip and/or top Boot Block
– Block Locking Register for all blocks
– Standard SDP Command Set
– Data# Polling and Toggle Bit for End-of-Writedetection
– 5 GPI pins for system design flexibility
– 4 ID pins for multi-chip selection
? Parallel Programming (PP) Mode
– 11-pin multiplexed address and
8-pin data I/O interface
– Supports fast In-System or PROM programming for
manufacturing
? CMOS and PCI I/O Compatibility
? Packages Available
– 32-lead PLCC
– 32-lead TSOP (8mm x 14mm)
– 40-lead TSOP (10mm x 20mm)
– Non-Pb (lead-free) packages available
? All non-Pb (lead-free) devices are RoHS compliant
?2011 Silicon Storage Technology, Inc.
www.microchip.com
DS25085A
10/11
相关PDF资料
SST49LF016C-33-4C-EIE-T IC FLASH SER LPC 16MBIT 40TSOP
SST49LF080A-33-4C-WHE-T IC FLASH SER LPC 8MBIT 32TSOP
SST49LF160C-33-4C-NHE IC FLASH SER LPC 16MBIT 32PLCC
ST40 DIAC 35-45V BILATERAL TRIG DO214
STRIKER SURGE SUPPRESSR 120V 7OUT 6'CORD
SUPER-7 SURGE SUPPRESSOR 7 OUT 7' CORD
SUPER6TEL12 SURGE SUPPR 7OUT 12'CORD W/RJ11
SUPER6TEL SURGE SUPPRESSOR 7OUT W/TEL
相关代理商/技术参数
SST49LF008A-33-4C-NH 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:2 Mbit / 3 Mbit / 4 Mbit / 8 Mbit Firmware Hub
SST49LF008A-33-4C-NHE 功能描述:闪存 8M (1Mx8) 33MHz Commercial Temp RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
SST49LF008A-33-4C-NHE_ 制造商:Microchip Technology Inc 功能描述:
SST49LF008A-33-4C-NHE-T 功能描述:闪存 8M (1Mx8) 33MHz 3.0-3.6V Commercial RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
SST49LF008A-33-4C-NHE-T-CUT TAPE 制造商:Microchip 功能描述:SST49LF Series 8 Mbit 1024 K x 8 3.3 V Firmware Hub - PLCC-32
SST49LF008A-33-4C-WH 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:2 Mbit / 3 Mbit / 4 Mbit / 8 Mbit Firmware Hub
SST49LF008A-33-4C-WHE 功能描述:闪存 8 MBIT FIRMWARE HUB RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
SST49LF008A-33-4C-WHE_ 制造商:Microchip Technology Inc 功能描述: